Genelec 1091A
Technical Specifications
| Free field frequency response ( ±2.5dB): | 38 - 85 Hz | |
| Maximum short term sine wave acoustic output in half space, averaged from 45 Hz to 80 Hz @ 1m: |
> 103 dB SPL | |
| Self generated noise level in free field @ 1m on axis (A-weighted): |
< 10 dB | |
| Harmonic distortion at 95 dB SPL @ 1m on axis in half space (40-85 Hz): |
< 3% | |
| Driver: | 210 mm (8") | |
| Weight: | 10.2 kg (22.4 lbs) | |
| Dimensions: Height Width Depth |
505 mm (19 7/8") 251 mm (9 7/8") 230 mm (9") |
|
AMPLIFIER |
||
| Amplifier output power (Long term output power is limited by driver unit protection circuitry): |
70 W (16 Ohm) | |
| Amplifier system distortion at nominal output: | THD < 0.08% CCIF-IM < 0.08% DIM 100 < 0.08% |
|
| Signal to Noise ratio, referred to full output: | > 90 dB | |
| Mains voltage: | 100/200V or 115/230V | |
| Power consumption (average): | Idle 9 VA Full output 100 VA |
|
FILTER |
||
| Lowpass filter above 85 Hz: | 24 dB/Octave | |
| Subsonic filter below 38 Hz: | 18 dB/Octave | |
| Crossover frequency (sub/main monitors): | 85 Hz | |
| Midband rejection, frequencies > 400 Hz: | > 50 dB | |
| Level control operating range in -2dB steps: | from 0 to -8 dB (reference to 1029/2029 output) |
|
All data subject to change without prior notice |
||