Genelec 1025B
System Specifications
| Lower cut-off frequency, -3 dB: | 28 Hz | |
| Upper cut-off frequency, -3 dB: | 20 kHz | |
| Passband response tolerance, free field | ± 3 dB | |
| Maximum continuous sine wave acoustic output @ 1m on axis in half space | > 121 dB | |
| Maximum peak acoustic output per pair behind a console, 2 m from the engineer | >128 dB | |
| 0 dBu will produce 107 dB SPL in free field @1 m on axis with the controls at 'CAL' position | ||
| Self generated noise level in free field @ 1m on axis | < 20 dB (A) | |
| Harmonic distortion at 105 dB SPL @ 1m on axis f < 200 Hz f > 200 Hz |
< 3 % < 2 % |
|
| Horizontal treble radiation loss at 30 ° off axis f = 10 kHz f = 15 kHz |
< 3 dB < 4 dB |
|
| Drivers Bass Mid Treble |
2 x 385 mm cone 80 mm dome 38 mm dome |
|
| Weight: Speaker Amplifier |
98 kg 28 kg |
|
| Dimensions, Speaker: Width Height Depth |
1105 mm 775 mm 553 mm |
|
| Dimensions, Amplifier: Width Height Depth |
483 mm 354 mm 220 mm |
|
Amplifier |
||
| Input connector | XLR female | |
| Bass amplifier output power, continuous transients |
2 x 225 W 2 x 260 W |
|
| Middle amplifier output power continuous transients |
100 W 300 W |
|
| Treble amplifier output power continuous transients |
20 W 180 W |
|
| Slew rate | 60 V /µs | |
| Amplifier system distortion at nominal output THD SMPTE-IM CCIF-IM DIM100 |
< 0,05 % < 0,1 % < 0,1 % < 0,1 % |
|
| Mains voltage, specifications applicable operation |
220 VAC 198...242 VAC |
|
| Other mains voltage specifications available on request | ||
| Power consumption, idle full output |
100 VA 1500 VA |
|
Crossover |
||
| Input impedance | 10 kOhm balanced | |
| Input level for maximum output, continuously variable | +13...+23 dBu | |
| Input attenuator, 2 positions |
-10 / 0 dB | |
| Subsonic attenuation | 12 dB @ 15 Hz | |
| Ultrasonic attenuation | 5 dB @ 30 kHz | |
| Crossover frequency bass / midrange midrange / treble |
500 Hz 3,5 kHz |
|
| Tone control operation range 1 dB steps bass middle treble |
0...-6 dB 0...-6 dB 0...-6 dB |
|
| Bass roll-off filter, 2 positions |
-4 or 0 dB @30 Hz | |
| Bass tilt control, 4 steps, 2 dB / step |
||
All data subject to change without prior notice |
||